The Yale Smart Lock Pro is a security enabled Z-Wave Plus product that is capable of using encrypted Z-Wave Plus messages to communicate to other security enabled Z-Wave Plus products.
The Yale Smart Lock Pro must be used in conjunction with a Security Enabled Z-Wave Controller in order to fully utilize all implemented functions.
The Yale Smart Lock Pro can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
Inclusion/Exclusion Process
** Can only be done once the lock is Set up and connected in the Yale App**
Inclusion Instructions
Go into Lock Settings and door for Z-Wave Settings. The first time the screen will state that "The Lock is not connected to a Z-Wave Network". Select "Add to a Z-Wave Network".
Follow the instructions to put the lock into Learn Mode.
Exclusion Instructions
Go into Lock Settings > Z-Wave Settings. If you are connected, you will see Remove Z-Wave Device. Select Remove Z-Wave Device and on the next page you will see two options.
- My Hub is in Exclusion Mode - Use this mode when you have a working hub and can properly disconnect.
- My Hub is No Longer Working - Use this mode to RESET the Device.
Select the My Hub is in Exclusion Mode option to exclude the lock from the Z-Wave network.
Reset Instructions
Go into Lock Settings > Z-Wave Settings. If you are connected, you will see Remove Z-Wave Device. Select Remove Z-Wave Device and on the next page you will see two options:
- My Hub is in Exclusion Mode - use this mode when you have working hub and can properly disconnect.
- My Hub is No Longer Working - use this mode to RESET the Device.
CAUTION: Resetting a Z-Wave device without notifying the hub may cause performance problems. Use this procedure only when the Z-Wave hub is missing or otherwise inoperable.
Select the My Hub is No Longer Working option and then select Reset Z-Wave Device.
Association Command Class Info - Association Group
The Yale Smart Lock Pro supports two association groups:
- Group 1 is the Lifeline group. It can contain up to 5 nodes. The Lifeline group on this lock is used to report battery status, door lock operation status, and device reset locally notifications to nodes on the group list.
- Group 2 is the Doorlock Op group. It can contain up to 5 nodes. The Doorlock Op group on this lock is used to report door lock operation status to nodes on the group list.
Security Command Class Info
After Non-Secure Inclusion
After Secure Inclusion
Non-Secure communication
Transport Service
Z-Wave Plus Info
Security 0 (S0)
Security 2 (S2)
Transport Service
Z-Wave Plus Info
Security 0 (S0)
Security 2 (S2)
Secure communication
N/A
Association
Association Group Information
Battery
Device Reset Locally
Door Lock
Firmware Update
Manufacturer Specific
Notification
Power Level
Security 0 (S0)
Security 2 (S2)
Transport Service
Version
Z-Wave Plus Info
Notification Command Class
The Yale Smart Lock Pro supports the following event types to be logged as part of the Notification Command Class.
- Manual Lock Operation
- Manual Unlock Operation
- RF Lock Operation
- RF Unlock Operation
- Keypad Lock Operation
- Keypad Unlock Operation
- Auto Lock Locked Operation
- Lock Jammed
Z-Wave™ and Z-Wave Plus are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries. Visit this website for Z-Wave™ support regions.