Upgrade your Yale Real Living lock system with this Z-Wave or Z-Wave Plus Radio Module. Made by Yale for Yale, you will have no issues connecting to your home Z-Wave network. Works with Z-Wave smart home and alarm systems including Samsung SmartThings, Wink, Vera, ADT, Alarm.com, Honeywell, Iris and more.

Before You Get Started

The Z-Wave Plus Module is compatible with: YRD216, YRD226, YRD246, YRD256, YRL216, YRL226, YRL236, YRL256, YRD416, YRD426, YRD446, NTB620 and NTB610.

If you already own a device that you’d like to connect to a smart home system, check if it uses ZigBee. Honeywell, ADT, LG and Verizon use Z-Wave, while Comcast and Time Warner Cable use ZigBee in set top boxes. Amazon Echo Plus has a built-in Zigbee smart home hub.

What You Need

The following is a list of everything you need to begin installing the module. Verify that all of these parts were included in the packaging:

• Yale Z-Wave Plus Network Module

You will also need:

• A small Phillips head screwdriver to remove the battery cover from your Assure Lock

Installation Steps

Installing the Z-Wave Network Module

IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module:

• Remove battery cover.
• Remove batteries.
• Remove and/or insert network module.
• Reinstall batteries.
• Replace cover.

Adding the Device to a Z-Wave Network

1. Open the Z-Wave system's smart home or alarm app on your smartphone or tablet
2. Follow in-app instructions for adding a new device
3. On your lock keypad, enter your master entry code followed by the gear icon
4. Press the “7” key followed by the [gear] icon
5. Press the “1” key followed by the [gear] icon

Removing a Yale Z-Wave Plus Smart Module from your Assure Lock and Z-Wave System

1. On your lock keypad, enter your master entry code followed by the gear icon
2. Press the “7” key followed by the [gear] icon
3. Press the “3” key followed by the [gear] icon
4. Open the Z-Wave system’s smart home or alarm app and follow the instructions for removing a device.
5. Remove the Yale Smart Module from the slot above the battery compartment.
   • IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module:
   • Remove battery cover and batteries.
   • Remove the Yale Smart Module.
   • Reinstall batteries and battery cover.
6. If you’re adding a new Yale Smart Module, follow the instructions included with the new one.